Planning a wind farm development involves much more than selecting turbine locations and arranging construction. Developers must understand the ground beneath the proposed infrastructure, assess potential environmental constraints and coordinate site investigations before finalising important design decisions.
A well-planned wind farm survey helps project teams gather the information they need to assess ground conditions, plan foundations and identify potential construction challenges. In Scotland, this preparation is particularly important because some proposed wind farm sites include steep terrain, extensive peatland, remote locations and limited access routes.
At Balmore Ltd, we understand the importance of planning specialist work around site conditions, access requirements and safety considerations. Although geotechnical investigations require appropriately qualified ground investigation specialists, careful coordination of access and supporting inspection work can help projects run more smoothly.
So, how should you schedule a wind farm geotechnical survey? Here are the key steps to consider.

Define the Scope of the Wind Farm Survey
Before booking a survey, establish exactly what information the project needs. The scope will influence the investigation methods, equipment, personnel and time required on site.
For a proposed wind farm, geotechnical investigations may assess the ground conditions around turbine foundations, access tracks, crane hardstandings, substations and other supporting infrastructure.
Depending on the project, the investigation may include:
- Desk studies: Reviewing existing geological maps, previous ground investigation reports and available site information.
- Site walkover surveys: Assessing visible ground conditions, terrain, drainage and potential constraints.
- Peat probing: Establishing peat depth and distribution where peatland is present.
- Trial pits and boreholes: Investigating subsurface materials and collecting samples.
- In-situ testing and laboratory analysis: Assessing relevant soil and rock properties to inform engineering decisions.
The geotechnical engineer should determine which methods are appropriate for the proposed development.
Start by discussing the project objectives, proposed infrastructure locations and required deliverables with the survey team. This will help establish a realistic programme and avoid arranging investigations that do not address the project’s requirements.
Review Site Conditions and Existing Information
Once you have defined the scope, review the available information about the site before confirming dates.
Scottish wind farm developments can encounter a range of ground conditions, including peat, soft soils, shallow rock and uneven terrain. These conditions can affect the suitability of foundation designs, the construction of access tracks and the movement of heavy investigation equipment.
Existing geological information, topographical surveys, drainage records and previous investigation reports can help identify areas that need closer attention.
Where peatland is present, developers should consider peat depth, ground stability and the potential effects of construction on surrounding habitats and water systems.
NatureScot’s guidance for onshore wind farm developments highlights the importance of assessing soils, geomorphology and potential slope stability issues during project planning. Read the guidance on onshore wind farm applications.
Reviewing these factors early helps the project team identify potential constraints before committing to a fieldwork schedule.
Plan Site Access and Equipment Requirements
Access is one of the most important considerations when scheduling a wind farm survey.
Remote sites may have narrow entrances, uneven tracks, weak ground or bridges that cannot accommodate certain vehicles. Some proposed turbine locations may also sit away from established access routes.
Before confirming the survey dates, establish how personnel, vehicles and investigation equipment will reach each work area.
Your planning checklist should cover:
- The condition and suitability of existing access tracks.
- Vehicle restrictions, gates and bridge load limits.
- The equipment required for boreholes, trial pits or other investigations.
- Safe working areas for machinery and personnel.
- Access restrictions caused by ground conditions or environmental sensitivities.
- Any specialist access equipment or temporary arrangements needed.
Where a site contains tall structures, difficult-to-reach buildings or other access challenges, specialist contractors may help assess the most appropriate access arrangements for their particular scope of work.
At Balmore, our rope access and specialist access capabilities support work in challenging environments. Where a wind farm project requires relevant access or inspection services, early coordination helps establish whether these methods are suitable for the task.

Choose the Right Time of Year
Weather can have a significant impact on geotechnical fieldwork in Scotland. Heavy rainfall, strong winds, low temperatures and saturated ground can affect access, equipment movement and working conditions.
Although some investigations can take place throughout the year, the most suitable schedule depends on the location, investigation methods and environmental requirements.
Before setting a date, consider:
- Ground conditions: Wet or saturated ground may restrict vehicle movement and the safe positioning of investigation equipment.
- Weather forecasts: Poor weather can disrupt travel to remote sites and affect safe working arrangements.
- Environmental constraints: Protected habitats, sensitive vegetation, wildlife and watercourses may require specific precautions or seasonal considerations.
- Project deadlines: Survey results may be needed before foundation design, planning submissions or construction begins.
Where possible, build contingency time into the programme. This gives the team flexibility to respond to adverse weather or unexpected ground conditions without immediately disrupting subsequent project stages.
A suitably qualified survey specialist can advise on realistic fieldwork dates once the site conditions and investigation methods are understood.
Coordinate Environmental Assessments and Permissions
A wind farm geotechnical survey should not be scheduled in isolation from other site investigations.
Developers may also need ecological, hydrological, archaeological and other environmental assessments. Coordinating these activities can help reduce unnecessary site visits and identify potential conflicts before work begins.
For example, investigation locations may need to avoid sensitive habitats, watercourses or areas of archaeological interest. Ground investigation can also affect the assessment of peat stability, drainage and potential environmental impacts.
Before mobilisation, check whether the project requires landowner permission, access agreements, relevant consents or other site-specific approvals.
The Scottish Government’s good practice guidance for wind farm construction discusses the importance of proportionate site investigation, environmental protection, access planning and ground risk management.
Coordinating the relevant specialists early helps ensure that fieldwork follows the agreed programme and accounts for the site’s environmental constraints.
Confirm Health and Safety Arrangements
Before the survey team arrives, make sure everyone understands the site’s working arrangements and responsibilities.
Geotechnical investigations may involve drilling rigs, excavations, heavy vehicles and potentially unstable ground. Remote locations can introduce additional challenges if emergency assistance is difficult to access.
The project team should establish appropriate risk assessments, safe systems of work, communication arrangements and emergency procedures before fieldwork begins.
Depending on the site, preparations may include:
- Site inductions and access briefings.
- Suitable personal protective equipment.
- Safe working zones around machinery and excavations.
- Procedures for working near watercourses or on unstable ground.
- Emergency contacts and arrangements for remote working.
- Clear communication between the client, survey team and other contractors.
The survey contractor should confirm the arrangements needed for its particular activities. Where several contractors work simultaneously, clear coordination helps reduce the risk of conflicting operations.
Agree the Programme, Deliverables and Reporting Dates
Once the scope, access, environmental requirements and safety arrangements are established, agree the final survey programme.
Rather than confirming only the first day of fieldwork, map out the full process from preparation through to delivery of the results.
A typical programme may include:
- Initial consultation and review of existing information.
- Site reconnaissance and confirmation of investigation locations.
- Access arrangements, permissions and safety planning.
- Fieldwork and collection of ground investigation data.
- Laboratory testing, where required.
- Interpretation of results and preparation of the technical report.
The overall duration will depend on the size of the site, number of investigation locations, equipment availability and complexity of the ground conditions.
Agree reporting deadlines at the outset, particularly if the findings will inform foundation design, turbine positioning or construction planning. If the investigation identifies unexpected ground conditions, the team may need additional testing or further specialist advice.

Why Early Scheduling Matters for Wind Farm Projects?
Scheduling a wind farm survey early gives developers more time to address ground risks before they affect design or construction.
A structured approach can help project teams:
- Identify potential ground stability and foundation issues.
- Plan access routes and equipment mobilisation.
- Coordinate environmental and engineering assessments.
- Reduce avoidable delays caused by incomplete preparation.
- Obtain the information needed for informed design decisions.
The survey findings must still be assessed by suitably qualified professionals, but early planning helps ensure that the right information is available at the right stage.
Arrange Specialist Survey and Access Support with Balmore
A successful wind farm geotechnical survey starts with clear objectives, an understanding of ground conditions and a realistic plan for access, fieldwork and reporting. By coordinating the relevant specialists early, developers can identify potential constraints and prepare for the next stage of their project.
At Balmore, we provide specialist access, rope access, drone inspection and building maintenance services across Scotland and the North of England. Our capabilities can support suitable inspection and access requirements associated with challenging sites, depending on the project’s needs.
If your renewable energy project involves difficult-to-access structures or requires specialist inspection support, our team can discuss the available options.
Planning a wind farm project in Scotland? Contact Balmore to discuss your access and inspection requirements and find out how we may be able to support your project.
Quotes & Enquiries
At Balmore, we offer the expertise of four decades in difficult access works including roofing, rope access, industrial cleaning and drone inspection services. Our one stop shop approach to inspection, repair and cleaning has grown through our desire to constantly exceed our clients expectations and offer a service that is far superior to our competitors.
Please fill in the form outlining your requirements and our contract team will be able to provide you with a bespoke quotation for your inspection, repair or cleaning needs.